Zyxel WAX650S 802.3BT PoE

The new WAX 650S from Zyxel is the first access point with a power draw of 31W / 802.3BT POE default. This means that you will not be able to operate with the normal Zyxel Switch line.
Only the XS1930-12HP is able to give enough POE Power to let it work in normal mode.

If you connect the AP to a “normal” POE Switch (with PoE 802.at) you will get following error:

Limited Power Mode

Zyxel NXC 2500

Alternativ you can use the power supply (12V DC). It is not included in the package content. Or you use at PoE Injector with the 802.3BT default.

You can buy them here:
Tools at Work


XS1930-12HP
XS1930-12HP
WAX650S
WAX650S

 Collapse All

ModelsWAX650S
Product name
Description802.11ax (WiFi 6) Dual-Radio Unified Pro Access Point
Wireless
StandardIEEE802.11 ax/ac/n/g/b/a
MIMOMU-MIMO
Wireless speed2.4GHz: 1150Mbps
5GHz: 2400Mbps
Frequency band2.4 GHz (IEEE 802.11 b/g/n)USA (FCC): 2.412 to 2.462 GHzEurope (ETSI): 2.412 to 2.472 GHz5 GHz (IEEE 802.11 a/n/ac)USA (FCC): 5.15 to 5.35 GHz; 5.725 to 5.850 GHzEuropean (ETSI): 5.15 to 5.35 GHz; 5.470 to 5.725 GHz
Bandwidth20-, 40- ,80- and 160-MHz
Conducted typical transmit output powerUS (2.4GHz/5GHz): 28/28dBm
EU (2.4GHz/5GHz): 19/26dBm
RF Design
Antenna type4×4 Smart Antenna
Antenna gain2.4GHz: Peak Gain 3dBi
5GHz: Peak Gain 5.8dBi
Minimum Receive sensitivity-105 dBm
WLAN feature
Band SteeringYes
WDSFuture suppoet
Mesh AP (By License)Future Support
Mesh AP for multiple SSID with VLANFuture Support
Smart meshFuture Support
Fast roamingPre-authentication, PMK caching and 802.11k/v/r
DCS (Auto Channel)Yes
Load balancingYes
Security
Wireless SecurityWPAWPA-PSKWPA-Enterprise (WPA/WPA2/WPA3)
Access managementL2-isolationMAC filteringRogue AP detectionEAPIEEE 802.1XRADIUS authentication
Networking
IPv6Yes
VLANsYes
WMMYes
U-APSDYes
DiffServ markingYes
Management
Operating modeNebula Cloud managedController-managedStandalone
ZON UtilityDiscovery of Zyxel switches, APs and gatewaysCentralized and batch configurations IP configuration IP renew Device factory resetDevice reboot Device locating Web GUI accessFirmware upgrade Password configuration One-click quick association with Zyxel AP Configurator (ZAC)
Zyxel AP ConfiguratorBatch AP configuration Batch AP firmware upgrade Batch AP profile backup
Zyxel Wireless OptimizerWiFi AP planningWiFi coverage detectionWireless health management
Web UI/ CLIYes
SNMPYes
Physical Specifications and others
ItemDimensions (WxDxH)(mm/in.)
230 x 235 x 53.5/9.06 x 9.25 x 2.11
Weight (g/lb.)
1160/2.56
PackingDimensions (WxDxH)(mm/in.)
282 x 266 x 79/11.1 x 10.47 x 3.11
Weight (g/lb.)
1490/3.38
Included accessoriesMount plateMounting screws
MTBF (hr)180,653
Physical Interfaces
Ethernet port1 x 1/2.5/5Gbps Ethernet (PoE port)1 x 1Gbps Ethernet
Power802.3BT POE (Maximum power draw: 31W)12V DC input
Environmental Specifications
OperatingTemperature
0°C to 50°C/32°F to 122°F
Humidity
10% to 95% (non-condensing)
StorageTemperature
-30°C to 70°C/-22°F to 158°F
Humidity
10% to 90% (non-condensing)
Certifications
RadioFCC Part 15CFCC Part 15EETSI EN 300 328EN 301 893LP0002
EMCFCC Part 15BEN 301 489-1EN 301 489-17EN55022EN55024EN61000-3-2/-3EN60601-1-2BSMI CNS13438
SafetySafety EN 60950-1IEC 60950-1BSMI CNS14336-1

Schreibe einen Kommentar

Deine E-Mail-Adresse wird nicht veröffentlicht. Erforderliche Felder sind mit * markiert.

Time limit is exhausted. Please reload the CAPTCHA.

Durch die weitere Nutzung der Seite stimmst du der Verwendung von Cookies zu. Weitere Informationen

Die Cookie-Einstellungen auf dieser Website sind auf "Cookies zulassen" eingestellt, um das beste Surferlebnis zu ermöglichen. Wenn du diese Website ohne Änderung der Cookie-Einstellungen verwendest oder auf "Akzeptieren" klickst, erklärst du sich damit einverstanden.

Schließen